The NEW A-5
The new A-5 stock combines all the most requested features of the entire A-series into one professional tactical rifle stock. Compared to our other A-series stocks, the A-5 uses a beavertail forearm that is wider and flatter. What's more the action and barrel sit lower for enhanced stability. The A-5 uses the trim A-3 pistol grip. The dual purpose butt hook is shallower and longer than the A-4, making it fully functional for either riding sandbags or controlling the rifle with the non-trigger hand. The A-5 can be made as light as 2.5 lbs.

The A-4 Tactical Sniper stock was originally designed for the USMC. The optional Adjustable saddle type cheek piece has been redesigned to be more comfortable and efficient. The fore-end is similar to the A-2 but with bottom dropped to be parallel to the top. It has the same vertical pistol grip and a new concept "Butt Hook" for better control of the butt with the non-trigger hand. Available with fixed length of pull or adjustable spacer system. The A-4 will accommodate all Remington 700 and Winchester Model 70 actions and can be customized for other actions at an additional cost. The stock is ambidextrous and may be inletted for both right and left hand.

The A-3 is a modified lightweight version of our famous A-2 stock. It is available with or without an integral adjustable cheek piece. The forend is .312 inch shallower from top to bottom to provide a more stable platform, while shooting off sand bags or a pedestal. The stock is also filled slightly lighter than the A-2 but retains all the features that make the A-2 such an excellent tactical stock. The A-3 is made primarily for Remington and Winchester actions, and it will take barrels up to 1.350 inches in diameter. Available in right and left-hand.

The A-2 Tactical Stock was designed using input from the U.S. Marine Corps as well as the F.B.I. It is the most widely used field sniper stock available and is duplicated often. A vertical pistol grip and straight line, extra-high comb provides for better prone shooting as well as seated bench type shooting. The forend is tapered downward from front to rear, which allows for minute elevation adjustments by sliding the rifle forward when using a front sand bagIt can be equipped with either a 3-way adjustable butt assembly, an adjustable spacer system or fixed length of pull. A saddle type cheek piece may be added for use with night vision equipment. Now available for FN Mauser actions and Sako actions. Available in right and left-hand.

M40A-1(HTG) - General Purpose Hunting
The original M40A1 Marine Sniper Rifle stock was designed for a heavy barrel Remington 700. It can be used for either short or long actions, as well as ADL (blind magazine) or BDL (hinged floorplate). It will take any barrel contour up to a #8. This stock can also be used for most Remington, Winchester, and Savage actions. The HTG is available with or without texture on the forend and pistol grip. Available in right and left-hand.

Our M3A stock was designed as an alternative to the pistol grip type M2A. It has a vertical pistol grip with a wrap-over thumb shelf and can be equipped with a vertically adjustable saddle type cheek piece. The butt is similar in design to the A-2 stock and can be fitted with an adjustable spacer system or a fixed length of pull. The forend is slightly smaller than our Match M1A and is consequently lighter and more maneuverable. It must be bedded. It is not legal for NRA Service Rifle Competition. For M14/M1A rifles only.

The M2A stock is a pistol grip M1A with a vertically adjustable saddle type cheek piece. It is designed to be used as a long-range weapon when equipped with a scope. The adjustable cheek piece allows the shooter to see through the scope and still maintain a desirable cheek weld. It must be bedded and is not legal for NRA Service Rifle Competition. For M14/M1A rifles only.

The M1A is patterned after the Marine Corps Match M14 stock and is ideal for a heavy barreled, match grade service rifle. It is available without hardware in molded-in colors only. It may be completely finished with a painted exterior if all hardware is supplied by the customer. It may or may not be fitted for the steel stock liner and must be properly bedded to the customer's action before firing. For M14/M1A rifles only.

The McHale stock was originally designed as a competition stock for use with a number of custom actions with thick benchrest type rear tangs. The generic reart tang area will require some fitting when used with most actions. It has high, straight comb without a cheekpiece so the stock can be shot from either side. The belly of the stock parallel to the top so it is best suited for a blind magazine or single shot rather than witha floorplate which requires some taper to the belly. This stock works well with most Nesika Bay, Stolle, Hall, BAT, and other benchrest type actions which do not have the normal Remingtion/Winchester tapered style rear tang. Can be inletted for the CZ-550 Magnum with heavy target type barrels at some sacrifice in cosmetics. Can be inletted for both right and left hand actions.

The SSG PI - PII stock was specifically designed for the SSG based on the A -3 pattern with Steyr quick adjustable spacer system, thumbwheel adjustable cheek piece, black anodized forend rail, Uncle Mike's sling swivel studs and finished in black paint.

The Prone Stock was patterned after an Anschütz® 1411 Prone Rifle Stock. It can be used for smallbore using the Anschütz® or several other rimfire actions. It is most commonly used in highpower with a Remington Model 700 or a Winchester Model 70. It comes with an adjustable cheek piece and can be fitted with a 3-way adjustable butt plate as well as either a Freeland or Anschütz® type handstop rail. Available in right or left-hand.

The Baker Special was designed by high power shooter Billie Baker using a Winchester Marksman as a starting point. He first extended the beavertail fore-end to the rear and tapered it back through the receiver area to increase stiffness. He then added a shallow drop belly so that Model 700's and Model 70's ould have a custom long magazine box fabricated to hold five rounds in the magazine for rapid fire. It is only available with a vertically adjustable comb. It may have the 2-way or 3-way buttplate fitted, and a fore-end rail but will not accept the spacer system. It is ambidextrous and may be inletted for both right and left hand. May also be inletted for the CZ-550 magnum with heavy target type barrels but requires some custom work on the rear tang of the stock.