|
Savage
Hunter: Is a beautifully designed stock with a monte carlo and
cheek piece as well as a small palm swell. Uniquely designed fine
line checkering adds to the "custom" look of this stock.
This stock is patterned after the factory Sako 75 and has been
adapted specifically for Remington 700 actions. It will accept up
to a #8 barrel contour. Available in right-hand only.
|
|
|
General
Purpose Hunting (HTG): The
original M40A1 Marine Sniper Rifle stock was originally designed
for a heavy barrel Remington 700. It can be used for either short
or long actions, as well as ADL (blind magazine) or BDL (hinged
floorplate). It will take any barrel contour up to a #8. This
stock can also be used for most Remington, Winchester, and Savage
actions. The HTG is available with or without texture on
forend and pistol grip. Available in right and left-hand.
|
|
|
Savage
Sporter Is a fine,
classic style hunting rifle stock, with a traditional design that
includes a shadow-line cheek piece, straight comb, and borderless
checkering on the forend and pistol gripThe forend is large enough
to take a #5 barrel contour. Available in right and left-hand.
|
|
|
Savage
Classic: Is an exact factory duplicate. It can be used with
both the long and short 700, the 721, 722, 788 and 40X actions.
This stock is available for ADL (blind magazine) or BDL (hinged
floorplate) and as a single shot using an ADL trigger guard and
will accommodate up to and including a #5 barrel contour.
Available in right and left-hand.
|
|
|
Savage
Mountain Rifle: The finely designed is a classic stock with a
cheek piece, can be used as a replacement for any factory mountain
rifle, or to convert a standard ADL or BDL rifle to a mountain
rifle. It will accept any factory barrel contour up to the magnum
or a #3 custom barrel. Available in right-hand only.
|
|
|
Savage
Varmint: has a beavertail forend that is approximately 2
inches wide and will take up to and including a (1.200 inch barrel
contour). It is a classic stock without a cheek piece and can be
fired either right or left-handed. Designed for use with Remington
700, both short and long actions, with BDL floorplate or single
shot. Not recommended for blind magazine ADL actions
|
|
|
|
Savage
BDL: Was patterned after a Remington Custom Shop .375 stock.
The forend is slightly larger than the factory stock and can
accommodate up to a #5 barrel contourIt may be used with long or
short 700 actions, ADL (blind magazine) or BDL (hinged floorplate)
and as a single shot using a Remington ADL trigger guard. Can also
be used for 721, 722, and 788. Available in right and left-hand.
|
