|
The
Remington Hunter is a beautifully designed
stock with a monte carlo and cheek piece as well as a small palm
swell. Uniquely designed fine line checkering adds to the
"custom" look of this stock. This stock is patterned
after the factory Sako 75 and has been adapted specifically for
Remington 700 actions. It will accept up to a #8 barrel contour.
Available in right and left hand.
|
|
The
Remington Sporter is a fine, classic style
hunting rifle stock, with a traditional design that includes a
shadow-line cheek piece, straight comb, and borderless checkering
on the forend and pistol grip The forend is large enough to take a
#5 barrel contour. Available in right and left-hand.
|
|
The
Remington Classic is an exact factory
duplicate. It can be used with both the long and short 700, the
721, 722, 788 and 40X actions. This stock is available for ADL
(blind magazine) or BDL (hinged floorplate) and as a single shot
using an ADL trigger guard and will accommodate up to and
including a #5 barrel contour. Available in right and left-hand.
|
|
The
Remington Model 7 is an exact copy of the
factory original stock. It is a classic style stock without a
cheek piece and has a schnabel forend. This stock is designed for
the Model 7 but can be used with most Remington actions. The Model
7 will take up to a #3 barrel contour. Available in right and
left-hand.
|
|
The
finely designed Remington Mountain Rifle
is a classic stock with a cheek piece, can be used as a
replacement for any factory mountain rifle, or to convert a
standard ADL or BDL rifle to a mountain rifle. It will accept any
factory barrel contour up to the magnum or a #3 custom barrel.
Available in right-hand only.
|
|
The
Remington Varmint has a beavertail forend
that is approximately 2 inches wide and will take up to and
including a (1.200 inch barrel contour). It is a classic stock
without a cheek piece and can be fired either right or
left-handed. Designed for use with Remington 700, both short and
long actions, with BDL floorplate or single shot. Not recommended
for blind magazine ADL actions.
|
|
The
Remington BDL was patterned after a
Remington Custom Shop .375 stock. The forend is slightly larger
than the factory stock and can accommodate up to a #5 barrel
contour. It may be used with long or short 700 actions, ADL (blind
magazine) or BDL (hinged floorplate) and as a single shot using a
Remington ADL trigger guard. Can also be used for 721, 722, and
788. Available in right and left-hand.
|
