Is specifically designed to fit the CZ 550 actions. The
buttstock has a straight comb and cheekpiece, and the
fairly narrow fore-end will take custom barrels up to a #
contour. This stock has fine checkering and is available
in right hand only.For CZ Magnum action, see CZ Express
Rifle Stock on this page.
Featherweight: Is a very nice small .22 sporter stock
with a high roll-over monte carlo cheekpiece and a small
schnabel fore-end. It was patterned after the Anschutz
factory Deluxe sporter stock and will only accommodate
ANschutz 1700 series actions. Available in right-hand only
Express: This is an english safari style stock
designed specifically for the CZ 550 Magnum action. It
will work with many other large caliber actions with drop
belly floorplates such as the Brno 602 and the Olympic
Arms BBK-01 and the 02 actions. The medium-width fore-end
will accept custom barrel contours up to a Douglas #5 but will
not take heavy straight taper target type contours.
is a classic stock, without a cheek piece, and was
designed specifically to fit the square tang type actions.
It works extremely well with the Shilen DGA, Stolle
Kodiak, and Hall custom actions. It will accommodate up to
and including a #5 barrel contour. This stock will not
work properly with Remington 700, Winchester 70 or Sako
actions. Available in right and left-hand.
Bay Varmint: The
stock was specifically designed for Nesika bay actions. It
is similar to the Remington Varmint straight comb no check
piece and beavertail forend. It can be inletted for right
or left-hand actions and can be shot from either side. It
is not available with checkering
stock is a European style stock with monte carlo cheek
piece and a small palm swell. It is available for the Colt
Sauer, Sauer 80, and the Sauer 90. Because of the
difficulty in fitting the clip properly, it is imperative
that we have the barreled action to ensure proper function
and fit. Available in right-hand only.
modification the Sako Hunter, it has a palm swell, and a
full monte carlo butt. The rear tang has been modified to
fit the older Tikka Model 65, and also works well with the
Remington 700 actions with factory barrels or custom
contours up to a #3 contour. Available in right hand only.